DialDim™ Lighting Controller
It allows you to sell a complete solution with easy control of all light functions
Functions
- Turns on/off and adjusts the intensity of two sets of auxiliary lights from a single switch
- The LED switch shows your exact settings
- Unlock smart flashing functions that can cancel your auxiliary lights with the arrow, flash the auxiliary lights as arrow, or flash the lights when you honk.
On/Off & Dim functions
Independently control two sets of lights by turning them on/off and adjusting their intensity level with the single DialDim™ switch. The blue ring controls the first set of lights and the green ring the second. Double click to switch between the two circuits.
Other functions
- High/Low Sync: Your auxiliary lights will automatically switch from your selected dimming setting to maximum intensity with the factory high beam switch.
- Stealth Mode: A clever 0% dimming setting on the switch allows your lights to be "off" during normal driving but will jump to 100% intensity with the vehicle's high beam switch.
- Cancel with Turn Signal: When enabled, the main lights (blue circuit 1) will cancel in sync with your signal to avoid "washing out" your factory turn signal.
- Flash as Turn Signal: When enabled, your amber (circuit green 2) visibility lights will flash in sync with your factory turn signals.
- Strobe with Horn: When enabled, your auxiliary lights on both circuits will flash at 4Hz when you sound the horn.
- Electronically Fused Circuits: Both lighting circuits are equipped with electronic fuses and can be set directly from the switch itself! The ring will light up red to alert you when a circuit is broken.
- Voltage Indicator: When starting the vehicle, the switch ring will flash green to indicate healthy battery voltage, or flash red to indicate battery voltage lower than 11.8V.
- Low Voltage Cutoff: If the battery voltage drops below 10.8V, the lights will not turn on to prevent you from being stranded. The switch ring will flash 4 red LEDs to indicate low voltage condition.